High-grade 316 stainless steel stock sheet, precision-cut to 0.352" thickness, 21" length, and 19" width. Engineered for exceptional corrosion resistance and superior performance in harsh environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 21" |
| Width | 19" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet boasts a nominal thickness of 0.352 inches, a length of 21 inches, and a width of 19 inches. Composed of an austenitic chromium-nickel-molybdenum alloy, it offers enhanced resistance to pitting and crevice corrosion, particularly in chloride-containing environments. Its excellent formability and weldability make it suitable for a wide range of fabrication processes, ensuring integrity and longevity in critical industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Carefully measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., plasma cutter, waterjet) to achieve precise dimensions. Avoid excessive heat input that could compromise material integrity. 4. Deburr all edges thoroughly to remove sharp points and prepare for subsequent processes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can introduce iron contamination and lead to rust. | Employ stainless steel-specific cutting tools and ensure all equipment is thoroughly cleaned before use. |
| Inadequate edge preparation after cutting, leading to stress risers or poor surface finish for joining. | Thoroughly deburr and smooth all cut edges to the required specification, ensuring a clean and uniform surface. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Marine Hardware, Food and Beverage Industry Fabrication, Medical Devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||