This 0.283-inch thick 316 stainless steel stock sheet is precision-manufactured for demanding lubricating applications. Its superior corrosion resistance and formability make it an excellent choice for custom fabricated components.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.283" |
| Length | 22" |
| Width | 16" |
Engineered for reliability and performance, this 316 stainless steel stock sheet offers exceptional durability and resistance to corrosive environments. Measuring 0.283 inches in thickness, 22 inches in length, and 16 inches in width, it is fabricated from premium 316 stainless steel, renowned for its molybdenum content which enhances pitting and crevice corrosion resistance, especially in chloride-rich media. This makes it ideal for applications requiring smooth, low-friction surfaces and extended service life, such as specialized bearings, sliding components, and wear pads within lubrication systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Fabricate to precise dimensions using appropriate cutting and forming tools. 3. Deburr all edges thoroughly to prevent material fatigue and ensure smooth operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel in highly corrosive environments. | Always specify 316 stainless steel for applications involving chlorides or aggressive chemicals. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to prevent stress concentrations and potential cracking. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom bearing surfaces, Low-friction sliding components, Wear pads in lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||