This 0.257-inch thick 316 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it a superior choice for critical pneumatic system components.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.257" |
| Length | 22" |
| Width | 21" |
A high-performance industrial component, this 316 stainless steel sheet boasts a nominal thickness of 0.257 inches, a length of 22 inches, and a width of 21 inches. Fabricated from Grade 316 stainless steel, it offers superior resistance to pitting and crevice corrosion in aggressive environments, particularly those containing chlorides. This makes it an ideal material for fabricating robust and reliable pneumatic enclosures, valve bodies, fittings, and structural supports subjected to moisture, corrosive chemicals, or high-pressure environments. Its inherent strength and non-magnetic properties further enhance its suitability for demanding industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any oils, debris, or contaminants. 2. Accurately mark and cut the sheet to the required dimensions using appropriate metalworking tools. 3. Deburr all cut edges to ensure a smooth finish and prevent potential hazards during subsequent fabrication or assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard carbon steel sheet for corrosive pneumatic environments. | Always specify 316 stainless steel for its enhanced corrosion resistance in damp, chemical, or high-salinity conditions. |
| Failing to properly deburr cut edges, leading to potential damage or injury. | Thoroughly deburr all edges after cutting to ensure safety and proper component fit. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Pneumatic Enclosures, Custom Valve Bodies, High-Pressure Fittings, Corrosion-Resistant Brackets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||