High-performance 316 stainless steel stock sheet, precisely manufactured to 0.174" thickness, 16" width, and 30" length. This raw material offers superior corrosion resistance for critical industrial projects.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.174" |
| Length | 16" |
| Width | 30" |
Built to exacting engineering tolerances, this 316 stainless steel stock sheet offers a nominal thickness of 0.174 inches, a width of 30 inches, and a length of 16 inches. Composed primarily of iron, chromium (minimum 16%), nickel (minimum 10%), and molybdenum (minimum 2%), 316 stainless steel exhibits exceptional resistance to pitting and crevice corrosion in chloride-rich environments, as well as general corrosion resistance superior to 304 grades. Its robust mechanical properties ensure integrity in high-stress applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and forming equipment is calibrated for the specified sheet thickness and material type. 2. Handle the sheet with appropriate lifting and positioning equipment to prevent damage and ensure operator safety. 3. Perform all fabrication processes (cutting, bending, welding) according to industry best practices for 316 stainless steel, maintaining material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tooling without proper adjustments, leading to contamination and reduced corrosion resistance. | Utilize dedicated stainless steel tooling, or meticulously clean and decontaminate any shared tooling before use. |
| Inadequate post-fabrication cleaning, leaving behind contaminants that can initiate corrosion. | Implement thorough pickling and passivation procedures after all fabrication steps to restore the passive oxide layer. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Chemical processing equipment, Marine hardware, Food processing machinery, Architectural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||