Engineered for demanding environments, this 1.3" IPS, Schedule 80 seamless pipe in 316 stainless steel offers superior corrosion resistance and high-pressure integrity for critical fluid transfer.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.3" |
| Outside Diameter | 6.341" |
| Wall Thickness | 0.403" |
Manufactured under strict quality controls, this 316 stainless steel seamless pipe conforms to rigorous industry standards for Schedule 80 dimensions. Featuring a nominal pipe size (NPS) of 1.3" (often referred to as 1.25" IPS), it exhibits an actual outside diameter of 6.341" and a substantial wall thickness of 0.403". The inherent properties of 316 stainless steel, including its enhanced molybdenum content, provide exceptional resistance to pitting and crevice corrosion, making it ideal for aggressive chemical processing, marine, and food/beverage industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free from contaminants. 2. Properly align pipe and fitting, maintaining consistent gap. 3. Secure joint using appropriate welding procedures for 316 stainless steel, ensuring full penetration and proper heat treatment if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding consumables for 316 stainless steel. | Always use welding consumables specifically designed for 316 stainless steel to maintain corrosion resistance. |
| Inadequate cleaning of pipe ends before welding. | Thoroughly clean pipe ends with a stainless steel wire brush and degreaser to remove any surface contaminants that could compromise weld integrity. |
A: This Seamless Pipe, Schedule 80 is manufactured from 316 Stainless Steel.
A: Chemical Processing, Marine Environments, Food and Beverage Production, High-Pressure Fluid Transfer Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||