This industrial-grade O-ring, constructed from robust 316 stainless steel, ensures reliable sealing in extreme environments. Engineered for precision and longevity, it's ideal for critical fluid and gas containment systems.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.457" |
| Outside Diameter | 9.459" |
| Cross Section | 0.252" |
Manufactured under strict quality controls, this O-ring boasts an inside diameter of 3.457 inches, an outside diameter of 9.459 inches, and a cross-section of 0.252 inches. The 316 stainless steel composition provides exceptional resistance to corrosion, oxidation, and a wide range of chemicals and temperatures. Its high tensile strength and rigidity make it suitable for high-pressure applications where standard elastomers may fail, ensuring a long service life and preventing leakage in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring into its designated groove, ensuring it is not twisted or overstretched. 3. Apply appropriate lubrication if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring | Adhere to specified torque values during assembly to avoid over-compression and permanent deformation of the O-ring. |
| Using incompatible cleaning agents that degrade the seal | Consult material compatibility charts and use only approved cleaning solutions for 316 stainless steel components. |
A: This Industrial O-Ring, Silicone is manufactured from 316 Stainless Steel.
A: High-pressure hydraulic systems, Chemical processing equipment, Aerospace fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||