Engineered for extreme environments, this 316 stainless steel industrial O-ring provides superior sealing integrity under high pressure and corrosive conditions, ensuring reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.007" |
| Outside Diameter | 8.652" |
| Cross Section | 0.090" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts a precise construction of 316 stainless steel, renowned for its exceptional corrosion resistance and mechanical strength, particularly in saltwater and chemical-laden atmospheres. With an Inside Diameter of 1.007 inches, an Outside Diameter of 8.652 inches, and a Cross Section of 0.090 inches, this seal is engineered for tight tolerances and a secure fit. Its robust material composition makes it ideal for applications demanding longevity and reliability in challenging industrial settings, including chemical processing, marine environments, and high-temperature fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned. 2. Carefully inspect the O-ring for any damage or defects before installation. 3. Gently install the O-ring into the groove, avoiding overstretching or pinching; use an appropriate lubricant if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can crush the O-ring and compromise its sealing ability. | Tighten fasteners to the manufacturer's recommended torque specifications to prevent O-ring damage. |
| Using incompatible lubricants or cleaning agents that can degrade the 316 stainless steel or the sealing surface. | Consult material compatibility charts and use only approved lubricants and cleaning solutions for 316 stainless steel and the specific media being sealed. |
A: This Industrial O-Ring, Silicone is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Marine and Offshore Systems, High-Temperature Fluid Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||