Engineered from premium 316 stainless steel, this deep groove ball bearing offers superior corrosion resistance and durability. Its precise construction ensures optimal performance in demanding power transmission applications.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 54mm |
| Width | 16mm |
Built to exacting engineering tolerances, this 316 stainless steel deep groove ball bearing boasts an inside diameter of 85mm, an outside diameter of 54mm, and a width of 16mm. The 316 stainless steel alloy provides exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking, making it suitable for wet, corrosive, or high-temperature environments where standard steel bearings would degrade. This material also offers enhanced antimicrobial properties. The deep groove raceway design accommodates radial loads and moderate axial loads in both directions, ensuring smooth, low-friction operation critical for efficient power transfer.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Verify dimensional compatibility. 2. Apply a light coating of appropriate lubricant to the shaft and inner ring before mounting. 3. Carefully press the bearing onto the shaft or into the housing, ensuring even pressure is applied to the inner or outer ring, respectively. Avoid hammering directly on the bearing. 4. Secure the bearing with appropriate retaining mechanisms if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the raceways. | Utilize a proper bearing installation tool or press, applying force only to the ring being mounted (inner ring for shaft mounting, outer ring for housing mounting). |
| Contaminating the bearing during handling and installation, compromising its lubrication and lifespan. | Keep the bearing in its original packaging until immediately before installation. Handle with clean gloves and in a clean environment. |
A: This Deep Groove Ball Bearing is manufactured from 316 Stainless Steel.
A: Marine equipment and offshore installations, Food processing and pharmaceutical machinery, Chemical processing equipment, Industrial pumps and mixers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||