Engineered for exceptional performance, this 316 stainless steel deep groove ball bearing offers superior corrosion resistance and load-bearing capabilities. Its precise construction ensures smooth operation and extended service life in aggressive environments.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 88mm |
| Outside Diameter | 63mm |
| Width | 46mm |
Specified by design engineers worldwide, this deep groove ball bearing features a precise 88mm inside diameter, a 63mm outside diameter, and a 46mm width. Constructed from high-grade 316 stainless steel, it provides exceptional resistance to corrosion, oxidation, and chemical attack, making it ideal for marine, food processing, and chemical handling applications. The material's inherent strength ensures robust performance under significant radial and axial loads, maintaining operational integrity in demanding conditions. Its advanced raceway geometry minimizes friction and heat generation, contributing to energy efficiency and reduced maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. Inspect for any damage or dimensional inaccuracies. 2. Apply a thin, even layer of appropriate bearing lubricant to the shaft and the inner ring of the bearing. 3. Carefully press the bearing onto the shaft using a hydraulic press or a specialized bearing installation tool, ensuring it is seated squarely and fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of housing and shaft prior to installation. | Thoroughly clean all mating surfaces, removing any dirt, grease, or burrs that could impede proper seating or cause premature wear. |
| Applying excessive force or uneven pressure during installation. | Utilize a controlled press or appropriate bearing installation tool to apply even pressure to the inner ring only, avoiding impact to the outer ring or cage. |
A: This Deep Groove Ball Bearing is manufactured from 316 Stainless Steel.
A: Marine Equipment, Food and Beverage Processing Machinery, Chemical Processing Plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||