Engineered for reliability in corrosive environments, this 316 stainless steel deep groove ball bearing offers exceptional load capacity and smooth operation for critical power transmission systems.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 57mm |
| Outside Diameter | 71mm |
| Width | 26mm |
Built to exacting engineering tolerances, this 316 stainless steel deep groove ball bearing (57mm ID x 71mm OD x 26mm Width) provides superior corrosion resistance due to its high chromium and molybdenum content. The 316 grade ensures excellent performance in saline, acidic, and high-temperature conditions, making it suitable for marine, food processing, and chemical handling machinery. Its robust construction allows for efficient radial and axial load support, minimizing friction and extending service life in demanding industrial environments. Rigorous quality control ensures consistent dimensional accuracy and material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring. 3. Verify smooth rotation after installation and secure any retaining components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fit. | Always apply force to the stationary ring when installing into a housing, and to the rotating ring when installing onto a shaft. |
| Insufficient or excessive lubrication. | Consult the manufacturer's lubrication guidelines for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from 316 Stainless Steel.
A: Marine propulsion systems, Food and beverage processing equipment, Chemical pump assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||