Engineered for superior performance and longevity, this 316 stainless steel deep groove ball bearing provides exceptional load-bearing capacity and corrosion resistance in challenging operational settings.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 57mm |
| Outside Diameter | 198mm |
| Width | 30mm |
Manufactured under strict quality controls, this 316 stainless steel deep groove ball bearing boasts an inside diameter of 57mm, an outside diameter of 198mm, and a width of 30mm. The superior corrosion resistance of 316 stainless steel makes it ideal for applications exposed to moisture, chemicals, or saltwater environments. Its robust construction ensures high radial and axial load capabilities, minimizing friction and wear for extended service life in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the shaft assembly into the housing, ensuring proper alignment and seating of the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the outer ring during shaft mounting. | Always apply force to the inner ring when mounting onto the shaft and to the outer ring when mounting into the housing, using appropriate tools for even pressure distribution. |
| Improper shaft or housing fit, leading to brinelling or premature wear. | Verify that the shaft and housing tolerances are within the recommended ranges for the specific bearing series to ensure a snug yet not overly tight fit. |
A: This Deep Groove Ball Bearing is manufactured from 316 Stainless Steel.
A: Marine Equipment, Chemical Processing, Food and Beverage Machinery, Corrosive Industrial Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||