Engineered for superior performance and longevity, this 316 stainless steel deep groove ball bearing offers exceptional corrosion resistance and load-bearing capabilities in challenging environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 51mm |
| Outside Diameter | 59mm |
| Width | 39mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts a precise 51mm inside diameter, a 59mm outside diameter, and a 39mm width. Constructed from premium 316 stainless steel, it exhibits superior resistance to corrosive agents, making it ideal for marine, chemical processing, and food/beverage applications. The hardened steel raceways and balls ensure smooth, low-friction rotation under significant radial and axial loads, providing reliable power transmission in demanding operational conditions. Its robust construction minimizes vibration and noise for enhanced system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. Verify proper shaft and housing fitment within recommended tolerances. 2. Carefully apply a thin, even layer of appropriate lubricant to the bearing raceways and balls before installation. 3. Press the bearing onto the shaft or into the housing using a controlled, even force, avoiding direct impact on the bearing rings or cages. Utilize bearing installation tools for optimal results.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the bearing's outer ring during shaft mounting. | Always apply force to the inner ring when mounting on the shaft, and to the outer ring when mounting in the housing, using appropriate press tools. |
| Contaminating the bearing with dirt, debris, or improper lubricants during installation. | Handle bearings in a clean environment and use only manufacturer-approved lubricants. Keep bearing packaging sealed until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from 316 Stainless Steel.
A: Marine equipment and propulsion systems, Chemical processing pumps and mixers, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||