This industrial O-ring features a robust 316 stainless steel construction with a Buna-N sealing element. Engineered for reliable performance in challenging applications requiring chemical resistance and durability.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.862" |
| Outside Diameter | 1.609" |
| Cross Section | 0.078" |
A high-performance industrial component, this Buna-N O-ring is constructed with a premium 316 stainless steel housing, offering exceptional corrosion resistance and mechanical strength. Its precise dimensions of 1.862" inside diameter, 1.609" outside diameter, and 0.078" cross-section ensure a tight seal against leaks in critical fluid and gas systems. The Buna-N elastomer provides excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of industrial applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating groove and sealing surfaces thoroughly to remove any debris or contaminants. 2. Carefully inspect the O-ring for nicks, cuts, or other defects before installation. 3. Gently install the O-ring into its designated groove, ensuring it is seated correctly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a damaged or defective O-ring. | Always visually inspect the O-ring for any signs of wear or damage before installation. Replace if any imperfections are found. |
| Overtightening fasteners, leading to O-ring extrusion or damage. | Adhere to recommended torque specifications for the assembly. Overtightening can deform the O-ring and compromise its sealing capability. |
| Installing the O-ring dry in a non-lubricated system. | Apply a compatible lubricant to the O-ring and mating surfaces to facilitate installation and prevent damage during assembly. Ensure the lubricant is compatible with the O-ring material and the media. |
A: This Industrial O-Ring, Buna-N is manufactured from 316 Stainless Steel.
A: Hydraulic systems, Pneumatic assemblies, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||