This Schedule 160 seamless pipe, fabricated from high-grade 316 stainless steel, offers exceptional strength and corrosion resistance for demanding industrial applications.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 4.167" |
| Wall Thickness | 0.250" |
A high-performance industrial component, this 316 stainless steel seamless pipe is engineered to withstand extreme pressures and corrosive media. With a nominal pipe size of 2.8 inches, it features an outside diameter of 4.167 inches and a robust wall thickness of 0.250 inches, conforming to Schedule 160 specifications. The inherent properties of 316 stainless steel, including its superior resistance to pitting and crevice corrosion in chloride-rich environments, make it ideal for applications in chemical processing, offshore oil and gas, and pharmaceuticals where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean pipe ends and fitting surfaces to remove any contaminants. 2. Ensure proper alignment of pipe and fittings prior to connection. 3. Utilize approved welding procedures and materials for secure joint fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible welding consumables. | Always use welding filler metals specifically rated for 316 stainless steel to maintain corrosion resistance. |
| Inadequate post-weld cleaning. | Perform thorough pickling and passivation after welding to remove heat tint and restore the protective oxide layer. |
A: This Seamless Pipe, Schedule 160 is manufactured from 316 Stainless Steel.
A: High-pressure chemical processing lines, Offshore oil and gas exploration equipment, Pharmaceutical and biotechnology fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||