Engineered for superior performance in corrosive environments, this 316 stainless steel deep groove ball bearing offers exceptional load-carrying capacity and smooth operation. Ideal for critical power transmission applications.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 97mm |
| Outside Diameter | 200mm |
| Width | 46mm |
Built to exacting engineering tolerances, this 316 stainless steel deep groove ball bearing boasts an inside diameter of 97mm, an outside diameter of 200mm, and a width of 46mm. The 316 stainless steel construction provides superior resistance to corrosion, rust, and a wide range of chemicals, making it suitable for wet, humid, or chemically aggressive environments. Its robust design ensures reliable and low-friction operation under radial and axial loads, contributing to extended equipment life and reduced maintenance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the bearing and the mounting surfaces. 2. Carefully press the bearing into the housing or onto the shaft, ensuring even pressure distribution. 3. Verify proper seating and axial play before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or uneven tightening of mounting fasteners. | Ensure all fasteners are tightened gradually and evenly to prevent shaft or housing distortion. |
| Contamination of the bearing during installation. | Install in a clean environment and use appropriate protective measures to prevent ingress of dirt or debris. |
A: This Deep Groove Ball Bearing is manufactured from 316 Stainless Steel.
A: Marine Equipment, Food Processing Machinery, Chemical Processing Plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||