This 3.1" Schedule 80 seamless brass pipe offers exceptional corrosion resistance and strength for critical industrial fluid handling applications. Engineered for reliability in challenging conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.1" |
| Outside Diameter | 1.390" |
| Wall Thickness | 0.248" |
Designed for demanding industrial environments, this 3.1" Schedule 80 seamless brass pipe boasts an outside diameter of 1.390" and a substantial wall thickness of 0.248", ensuring superior structural integrity and pressure handling capabilities. The inherent corrosion resistance of brass makes it ideal for transporting a wide range of fluids, including water, mild chemicals, and petrochemicals, without degradation. Its seamless construction eliminates weak points, providing a consistent and leak-free performance in applications requiring high reliability and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of any debris. 2. Apply appropriate fitting lubricant to the pipe end before assembly. 3. Tighten fittings securely to the specified torque to achieve a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fittings not rated for Schedule 80 brass pipe. | Always use fittings specifically designed and rated for Schedule 80 brass pipe to ensure proper pressure containment and compatibility. |
| Over-tightening or under-tightening threaded connections, leading to leaks or damage. | Follow manufacturer recommendations for torque specifications when tightening threaded fittings to prevent leaks and avoid damaging the pipe or fitting. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Chemical processing plants, Marine and offshore environments, High-pressure fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||