This Nylon Deep Groove Ball Bearing offers a lightweight, corrosion-resistant solution for power transmission applications. Its precise dimensions ensure smooth operation and reduced friction in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 30mm |
| Outside Diameter | 37mm |
| Width | 24mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 30mm, an outside diameter of 37mm, and a width of 24mm. Constructed from high-performance nylon, it provides excellent chemical resistance, a lower coefficient of friction compared to steel bearings, and inherent electrical insulation properties. This makes it ideal for applications where corrosion is a concern or where a non-conductive bearing is required. Its lightweight nature also contributes to reduced rotational inertia, benefiting applications with high-speed requirements or those focused on energy efficiency. Designed for moderate load capacities and high rotational speeds, it excels in conveyor systems, automated machinery, and light-duty industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat is clean and free from debris. 2. Carefully press the bearing into the designated housing, applying even pressure to the outer ring. 3. Verify smooth rotation after installation and check for any binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the bearing during press-fit installation. | Apply only sufficient force to seat the bearing firmly. Over-tightening can damage the nylon cage or raceways, leading to premature failure. |
| Exposing the nylon bearing to excessive temperatures or harsh chemicals beyond its resistance limits. | Consult the material datasheet for specific temperature and chemical compatibility. Select an alternative bearing material if operating conditions exceed nylon's capabilities. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Automated manufacturing equipment, Light-duty industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||