Engineered for superior strength and corrosion resistance, this 304 stainless steel U-bolt is specifically designed to secure 3" nominal pipe. Its robust construction ensures reliable performance in challenging environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.36" |
| Inside Length ( B) | 5.72" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this U-bolt is fabricated from premium 304 stainless steel, offering exceptional resistance to a wide range of corrosive agents and environments, including saltwater and chemical exposure. The precise dimensions, including an inside width (A) of 1.36 inches and an inside length (B) of 5.72 inches, are optimized for a secure fit around 3" nominal pipe. The 1/2"-13 thread size provides ample engagement for standard nuts, ensuring a strong and stable connection suitable for critical infrastructure, marine applications, and chemical processing equipment where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it rests squarely on the pipe's exterior. 2. Place the accompanying U-bolt plate (if applicable) or flat washer against the pipe's curvature, on the opposite side of the U-bolt legs. 3. Thread the nuts onto the U-bolt legs, tightening them evenly and progressively to achieve the specified torque, ensuring the pipe is securely held without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, potentially deforming the pipe or U-bolt. | Use a torque wrench to tighten nuts to the manufacturer's recommended specification for the pipe and U-bolt. |
| Using the wrong size U-bolt, leading to a loose or insecure fit. | Verify the pipe's nominal size and the U-bolt's inside dimensions (width and length) before installation. |
A: This 304 Stainless Steel U-Bolt, 3" Pipe is manufactured from 304 Stainless Steel.
A: Pipe support and anchoring in marine environments, Securing conduits and tubing in chemical processing plants, Structural support in corrosive industrial settings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||