This robust 304 stainless steel U-bolt is engineered for secure pipe support in demanding industrial settings. Its corrosion-resistant properties ensure long-term performance, making it ideal for critical applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 3.08" |
| Inside Length ( B) | 7.02" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this U-bolt is constructed from premium 304 stainless steel, renowned for its exceptional resistance to corrosion and oxidation, particularly in marine and chemical environments. The design features an inside width (A) of 3.08 inches and an inside length (B) of 7.02 inches, specifically tailored for securing 2-inch nominal diameter pipes. The robust 1/2"-13 UNC thread size on both legs provides ample engagement for standard nuts, ensuring a secure and reliable connection. This material grade offers superior strength and durability, making it suitable for a wide range of load-bearing applications where structural integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring the pipe is centrally located within the curved section. 2. Place the U-bolt legs on either side of the mounting surface (e.g., beam, support structure). 3. Secure the U-bolt by threading the provided nuts onto the legs until snug. Torque to manufacturer specifications if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly sizing the U-bolt for the pipe diameter. | Always verify the inside width (A) of the U-bolt accommodates the outer diameter of the pipe with sufficient clearance for easy installation. |
| Using standard carbon steel U-bolts in corrosive environments. | Utilize 304 stainless steel U-bolts for applications exposed to moisture, chemicals, or saltwater to prevent premature corrosion and failure. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Marine pipe and conduit support, Chemical processing plant piping, Food and beverage industry installations, Outdoor structural support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||