This 304 stainless steel U-bolt is engineered for secure mounting of 3-inch diameter pipes. Its robust construction and superior corrosion resistance ensure long-lasting performance in challenging conditions.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 3.37" |
| Inside Length ( B) | 3.00" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt is fabricated from high-grade 304 stainless steel, offering exceptional resistance to corrosion, oxidation, and pitting across a wide range of chemical and environmental exposures. The nominal pipe size accommodated is 3 inches, with precise measurements of 3.37 inches for inside width (A) and 3.00 inches for inside length (B). It features a robust 1/2"-13 UNC thread size, ensuring secure fastening with standard nuts and washers. This specification guarantees a reliable and durable solution for pipe support and clamping applications where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate U-bolt based on pipe diameter and mounting surface. 2. Position U-bolt around the pipe, passing through designated mounting holes or brackets. 3. Securely fasten with corresponding nuts and washers, ensuring even tightening on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect U-bolt size for the pipe diameter. | Always verify the inside width and length dimensions of the U-bolt against the actual pipe OD and mounting requirements. |
| Over-tightening or under-tightening the nuts. | Tighten nuts to recommended torque specifications for the thread size to prevent pipe deformation or loose connections. |
| Using standard steel U-bolts in corrosive environments. | Utilize 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent premature rust and failure. |
A: This 304 Stainless Steel U-Bolt, 3" Pipe is manufactured from 304 Stainless Steel.
A: Marine hardware and boat rigging, Chemical processing equipment support, Plumbing and HVAC pipe securing, Automotive exhaust system mounting, Structural pipe framing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||