Engineered for superior corrosion resistance and strength, this 304 stainless steel U-bolt is specifically designed to secure 2" nominal pipe. Its robust construction ensures reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.52" |
| Inside Length ( B) | 4.53" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this U-bolt is fabricated from premium 304 stainless steel, offering exceptional resistance to a wide range of corrosive media and environments. The precise dimensions, including an inside width (A) of 1.52 inches and an inside length (B) of 4.53 inches, are optimized for a secure fit around a 2-inch nominal pipe. Featuring a robust 1/2"-13 UNC thread size, it provides ample thread engagement for secure fastening with standard nuts and washers, ensuring long-term structural integrity and preventing slippage or loosening under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring the pipe is centered within the U-bolt's legs. 2. Place a washer on each leg of the U-bolt, followed by a hex nut. 3. Tighten the nuts evenly and progressively to achieve the desired clamping force, ensuring the pipe is held securely without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the U-bolt, which can deform the pipe or strip the threads. | Tighten nuts evenly and progressively until snug. Use a torque wrench if precise clamping force is critical for the application. |
| Using a U-bolt with incorrect dimensions for the pipe size, leading to a loose or insecure fit. | Verify the U-bolt's inside width and length dimensions match the specific pipe diameter being secured, including any insulation or conduit. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Marine and offshore environments, Chemical processing plants, Food and beverage industry, Wastewater treatment facilities, General pipe support and clamping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||