Engineered for robust pipe support, this 304 stainless steel U-bolt provides reliable fastening for 2-inch diameter piping systems. Its superior corrosion resistance ensures longevity in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.15" |
| Inside Length ( B) | 4.40" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt is constructed from high-grade 304 stainless steel, offering exceptional resistance to corrosion, oxidation, and pitting, making it ideal for marine, chemical, and outdoor applications. The internal dimensions are precisely set at 3.15 inches (A) for width and 4.40 inches (B) for length, ensuring a secure fit around standard 2-inch nominal pipe. It features robust 1/2"-13 UNC threads, providing ample engagement for accompanying nuts and washers to achieve secure and stable pipe mounting. The material's inherent strength and durability guarantee long-term performance under various load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate U-bolt and mounting hardware (nuts, washers, backing plate if required). 2. Position the U-bolt around the 2" pipe, ensuring it rests evenly on the pipe surface. 3. Secure the U-bolt by threading nuts onto the U-bolt legs. Hand-tighten initially. 4. Use a wrench to gradually tighten the nuts in an alternating pattern, ensuring uniform pressure and preventing pipe deformation. Check for stability and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening U-bolt nuts, leading to pipe deformation or damage. | Tighten nuts gradually and evenly, alternating sides, until the pipe is firmly secured without excessive pressure. Consult pipe manufacturer recommendations for torque if applicable. |
| Using the wrong U-bolt size or thread pitch for the pipe and hardware. | Verify the pipe's nominal diameter and measure the U-bolt's internal dimensions and thread size (1/2"-13 UNC for this product) against specifications before installation. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Plumbing and HVAC pipe support, Marine and offshore structural applications, Chemical processing equipment mounting, Exhaust system support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||