This 304 stainless steel U-bolt is engineered to securely fasten 2-inch nominal pipe. Its robust construction and corrosion resistance make it the ideal choice for demanding environments where reliable pipe support is critical.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.77" |
| Inside Length ( B) | 6.45" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is manufactured from high-grade 304 stainless steel, offering superior corrosion resistance and durability in various environmental conditions. The dimensions are optimized for a 2" nominal pipe size, with an Inside Width (A) of 3.77" and an Inside Length (B) of 6.45". The 1/2"-13 UNC threads provide robust fastening capabilities. This material grade ensures longevity and structural integrity, preventing rust and degradation, making it suitable for marine, chemical processing, and outdoor applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Insert the threaded ends through the corresponding holes in the mounting plate or bracket. 3. Secure tightly with the provided nuts and washers, ensuring even pressure on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, which can deform the pipe or mounting surface. | Tighten nuts until snug, then an additional 1/4 to 1/2 turn to ensure a secure fit without excessive force. |
| Using a U-bolt with incorrect dimensions for the pipe size. | Always verify the nominal pipe size and match it with the U-bolt's inside width and length specifications. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Marine pipe support, Chemical processing equipment, Outdoor conduit and pipe mounting, Plumbing and HVAC systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||