Engineered for secure pipe mounting, this 304 stainless steel U-bolt is designed for a 2" nominal pipe size. Its robust construction ensures reliable support and long-term corrosion resistance in various industrial applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 4.82" |
| Inside Length ( B) | 6.31" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt is fabricated from high-grade 304 stainless steel, offering superior resistance to corrosion, oxidation, and pitting in humid or chemically aggressive environments. With an inside width (A) of 4.82 inches and an inside length (B) of 6.31 inches, it is specifically designed to accommodate a 2-inch nominal pipe diameter. The 1/2"-13 UNC thread size ensures compatibility with standard hardware for secure fastening. This material selection guarantees extended service life and structural integrity under typical operating loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe. 2. Place the U-bolt over the mounting surface or saddle. 3. Securely fasten using the provided 1/2"-13 nuts and washers (sold separately).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size against the U-bolt's inside dimensions before installation. |
| Overtightening the nuts, leading to thread damage. | Tighten nuts evenly and firmly, ensuring a secure fit without deforming the pipe or U-bolt threads. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Plumbing and Pipe Support, Marine Hardware, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||