This robust 304 stainless steel U-bolt is engineered for secure and reliable pipe support. Featuring a 1.37" inside width and 6.49" inside length, it's ideal for 2" nominal pipe applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.37" |
| Inside Length ( B) | 6.49" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this U-bolt is fabricated from premium 304 stainless steel, offering superior corrosion resistance and durability in demanding environments. Its precise dimensions, including an inside width (A) of 1.37 inches and an inside length (B) of 6.49 inches, ensure a snug and secure fit around 2-inch nominal pipe. The 1/2"-13 UNC thread size on the legs provides ample material for secure fastening with standard nuts and washers, making it suitable for static and dynamic load applications in chemical processing, marine, and food & beverage industries where hygiene and corrosion prevention are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe rests evenly within the curve. 2. Place a backing plate (if required by design) against the pipe's surface. 3. Thread nuts onto the U-bolt legs, tightening them alternately and evenly to achieve secure clamping pressure without over-stressing the pipe or U-bolt.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a U-bolt with insufficient inside width for the pipe's actual outer diameter. | Verify the pipe's outer diameter and select a U-bolt with an inside width that accommodates it with a slight clearance for insulation or expansion. |
| Overtightening nuts, leading to pipe deformation or U-bolt fatigue. | Tighten nuts incrementally and alternately, using torque specifications if provided, to ensure even pressure and avoid material stress. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe support and clamping in corrosive environments, Marine and offshore structural applications, Food processing and pharmaceutical equipment support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||