Engineered for superior corrosion resistance and durability, this 304 stainless steel U-bolt is specifically designed to secure 2-inch nominal pipe. Its robust construction ensures a reliable and long-lasting hold in challenging industrial and marine applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.33" |
| Inside Length ( B) | 2.02" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt features a 1.33-inch inside width (A) and a 2.02-inch inside length (B), precisely accommodating 2-inch nominal pipe diameters. Constructed from premium 304 stainless steel, it offers exceptional resistance to rust, corrosion, and pitting, making it ideal for marine, chemical processing, food and beverage, and outdoor structural applications. The 1/2"-13 UNC thread size ensures compatibility with standard nuts and washers for secure fastening. This material grade provides excellent strength and longevity in harsh and humid environments, preventing premature failure and maintaining structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe rests evenly within the curved section. 2. Place the included mounting plate or washer(s) against the flat surface where the pipe is being secured. 3. Thread the nuts onto the U-bolt legs, tightening them evenly and progressively until the pipe is firmly secured without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a U-bolt with insufficient inside width for the pipe's outer diameter. | Always verify the U-bolt's inside width (A) is slightly larger than the pipe's outer diameter to allow for proper fit and secure clamping. |
| Over-tightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts gradually and evenly until snug, then apply a final quarter-turn. Avoid excessive force. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Marine pipe support, Plumbing and conduit securing, Structural framing and bracing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||