Engineered from premium 304 stainless steel, this U-bolt ensures robust and corrosion-resistant support for 2" nominal pipe. Its precise dimensions guarantee a secure fit in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.06" |
| Inside Length ( B) | 2.96" |
| Thread Size | 1/2"-13 |
Purpose-built for heavy-duty applications, this 304 stainless steel U-bolt offers superior strength and longevity. With an inside width (A) of 1.06 inches and an inside length (B) of 2.96 inches, it is designed to securely accommodate 2" nominal pipe diameters. The 1/2"-13 thread size allows for ample load-bearing capacity and compatibility with standard fasteners. The 304 stainless steel composition provides excellent resistance to a wide range of corrosive agents, making it ideal for marine, chemical processing, food and beverage, and outdoor infrastructure applications where rust and degradation are critical concerns. This U-bolt is manufactured to exacting tolerances, ensuring consistent performance and reliability in structural support and pipe anchoring.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe is properly supported before installation. 2. Position the U-bolt around the pipe, aligning the legs with the mounting surface. 3. Secure the U-bolt using appropriate washers and nuts (not included), tightening evenly on both sides to achieve firm contact without over-stressing the pipe or mounting surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size and compare it against the U-bolt's specified dimensions (inside width and length) to ensure a correct fit. |
| Overtightening the nuts, leading to pipe deformation or U-bolt damage. | Tighten nuts incrementally and evenly on both sides. Use a torque wrench if specified for the application to avoid excessive pressure. |
| Using standard carbon steel U-bolts in corrosive environments. | For applications exposed to moisture, chemicals, or saltwater, always opt for corrosion-resistant materials like 304 or 316 stainless steel to prevent premature failure. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe and conduit clamping in marine environments, Support for plumbing and HVAC systems in corrosive atmospheres, Anchoring of structural elements in chemical processing plants, Securing conduit and piping in outdoor infrastructure projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||