This 304 stainless steel U-bolt is engineered to securely fasten 1" nominal pipe. Offering superior corrosion resistance and durability, it's the ideal choice for demanding applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.72" |
| Inside Length ( B) | 4.14" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is manufactured from high-grade 304 stainless steel, providing excellent resistance to a broad spectrum of corrosive agents, including chlorides and acids. Its precise dimensions, with an inside width (A) of 3.72 inches and an inside length (B) of 4.14 inches, ensure a snug and secure fit around a 1-inch nominal pipe. The robust 1/2"-13 UNC threads are designed for maximum load-bearing capacity and are compatible with standard nuts and washers for secure fastening. This specification makes it suitable for marine, chemical processing, food and beverage, and other environments where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate U-bolt and mounting hardware, ensuring compatibility with the structural support. 2. Position the U-bolt around the pipe and thread the mounting plate or support structure. 3. Securely tighten the nuts to the specified torque, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using carbon steel U-bolts in corrosive environments. | Always specify 304 or 316 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent rust and premature failure. |
| Overtightening the U-bolt nuts, leading to thread stripping or pipe deformation. | Use a torque wrench to tighten nuts to the manufacturer's recommended specification, ensuring a secure fit without damaging the pipe or bolt. |
A: This 304 Stainless Steel U-Bolt, 1" Pipe is manufactured from 304 Stainless Steel.
A: Pipe and conduit support in marine environments, Securing piping in chemical processing plants, Mounting racks and equipment in food and beverage facilities, Structural bracing in corrosive atmospheric conditions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||