This 304 stainless steel U-bolt is engineered for secure and corrosion-resistant support of 1-inch nominal pipe. Featuring robust construction and precise dimensions, it ensures long-term structural integrity in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.21" |
| Inside Length ( B) | 6.82" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is manufactured from premium 304 stainless steel, offering superior resistance to corrosion and oxidation, making it ideal for marine, chemical processing, and outdoor applications. The internal dimensions are precisely machined with an inside width (A) of 3.21 inches and an inside length (B) of 6.82 inches, designed to accommodate a 1-inch nominal pipe. The threaded ends feature a robust 1/2"-13 UNC thread size, ensuring secure fastening with compatible nuts and washers for a dependable pipe clamping solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" pipe, ensuring it is centered. 2. Place the U-bolt over the mounting surface or bracket. 3. Securely fasten the U-bolt using two 1/2"-13 nuts and appropriate washers, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts until snug, then apply an additional 1/4 to 1/2 turn for a secure fit without excessive force. Use a torque wrench if specified for critical applications. |
| Using the wrong size U-bolt for the pipe diameter, leading to a loose or damaged installation. | Always verify the U-bolt's internal dimensions (width and length) against the nominal pipe size and any required clearance. |
A: This 304 Stainless Steel U-Bolt, 1" Pipe is manufactured from 304 Stainless Steel.
A: Marine hardware and rigging, Chemical processing pipe support, Outdoor conduit and pipe anchoring, Plumbing and HVAC systems, General structural pipe clamping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||