This 304 Stainless Steel U-Bolt is engineered for robust pipe support and securing applications. Its superior corrosion resistance makes it ideal for environments where standard steel would fail, ensuring long-term structural integrity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 4.87" |
| Inside Length ( B) | 2.31" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 304 Stainless Steel U-Bolt offers exceptional corrosion resistance and mechanical strength, making it the preferred choice for demanding industrial and marine applications. With an inside width (A) of 4.87 inches and an inside length (B) of 2.31 inches, it is precisely designed to accommodate standard 2-inch nominal pipe. The robust 1/2"-13 thread size ensures secure fastening when used with compatible nuts and washers. The 304 stainless steel composition provides excellent resistance to a wide range of corrosive media, including many acids, alkalis, and salts, at elevated temperatures. This U-bolt is manufactured to exacting tolerances to ensure consistent performance and reliable load-bearing capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring the pipe sits evenly within the U-bend. 2. Place the mounting surface or saddle against the back of the U-bolt. 3. Secure the U-bolt by threading the provided nuts onto the bolt ends, tightening them evenly and progressively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts evenly and progressively to the recommended torque specification for the thread size and application to avoid over-stressing components. |
| Using a U-bolt with an inside width or length that is not appropriate for the pipe diameter and mounting configuration. | Verify that the U-bolt dimensions (Inside Width A and Inside Length B) are correctly matched to the nominal pipe size and the required clearance for the mounting hardware and substrate. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe and conduit support in corrosive environments, Marine and offshore structural anchoring, Chemical processing and food grade applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||