Engineered from premium 304 stainless steel, this U-bolt provides superior corrosion resistance for 2" pipe mounting. Its robust design ensures secure and long-lasting support in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 4.18" |
| Inside Length ( B) | 7.65" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt is precisely manufactured from grade 304 stainless steel, renowned for its excellent corrosion and oxidation resistance, making it ideal for harsh environments. The inside width (A) measures 4.18 inches, accommodating a 2-inch nominal pipe size with adequate clearance for insulation or coatings. The inside length (B) is 7.65 inches, offering substantial material for secure clamping and attachment to mounting surfaces. Threaded ends feature a standard 1/2"-13 UNC thread size for compatibility with a wide range of nuts and washers, ensuring a reliable and secure fastening system in plumbing, structural, and marine applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate nuts and washers compatible with the 1/2"-13 thread size. 2. Position the U-bolt around the 2" pipe, ensuring it rests evenly on the pipe surface. 3. Secure the U-bolt by threading the nuts onto the bolt legs, tightening them evenly and progressively until the pipe is firmly held.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel U-bolts in corrosive environments. | Always select 304 or 316 stainless steel U-bolts for marine, chemical, or outdoor applications to prevent premature corrosion and failure. |
| Over-tightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts gradually and evenly, using a torque wrench if specified for the application, to achieve a secure hold without damaging components. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe and conduit support in corrosive environments, Marine hardware and boat rigging, Structural support for tubing and rods.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||