This 304 stainless steel U-bolt is engineered for secure pipe support, offering superior corrosion resistance for demanding environments. Precisely manufactured to fit 3" nominal pipe.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 3.50" |
| Inside Length ( B) | 4.72" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 304 stainless steel U-bolt provides exceptional durability and corrosion resistance, making it ideal for marine, chemical processing, and outdoor applications. The material's inherent chromium and nickel content ensures a passive oxide layer, protecting against rust and pitting. With an inside width (A) of 3.50 inches and an inside length (B) of 4.72 inches, it is designed to securely accommodate a 3-inch nominal pipe. The robust 1/2"-13 UNC threads allow for reliable fastening with standard nuts and washers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and through the mounting surface or bracket. 2. Thread the nuts onto the U-bolt legs. 3. Tighten the nuts evenly on both sides to secure the pipe without over-compressing it.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a U-bolt not rated for the specific environment (e.g., non-stainless in corrosive areas). | Always select a U-bolt manufactured from material suitable for the intended application's environmental conditions, such as 304 or 316 stainless steel for corrosive or marine settings. |
| Over-tightening the U-bolt, which can deform the pipe or mounting surface. | Tighten the nuts until snug and the pipe is securely held, but avoid excessive force that could cause damage. Use a torque wrench if specified for critical applications. |
A: This 304 Stainless Steel U-Bolt, 3" Pipe is manufactured from 304 Stainless Steel.
A: Pipe support and anchoring in marine environments, Securing conduits and tubing in chemical processing plants, General-purpose pipe fastening in outdoor structural applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||