Engineered for robust pipe support, this 304 stainless steel U-bolt provides secure fastening for 2" nominal diameter pipes. Its durable construction ensures long-term reliability in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 1.97" |
| Inside Length ( B) | 4.54" |
| Thread Size | 1/2"-13 |
Trusted by engineers across multiple sectors, this U-bolt is fabricated from high-grade 304 stainless steel, offering superior corrosion resistance and mechanical strength for critical infrastructure and industrial applications. The precise dimensions, including an inside width (A) of 1.97 inches and an inside length (B) of 4.54 inches, ensure a snug and secure fit around standard 2-inch pipes. The robust 1/2"-13 UNC thread size facilitates reliable load-bearing capacity. This material and design are ideal for marine, chemical processing, and food/beverage industries where hygiene and environmental resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe is centered between the legs. 2. Place the provided flat or saddle washer (if applicable) over the threaded ends. 3. Thread the nuts onto the U-bolt legs, tightening them evenly and alternating between sides to achieve uniform pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening U-bolt nuts, which can deform the pipe or damage the threads. | Tighten nuts to the recommended torque specification for the application, typically found in engineering handbooks or manufacturer guidelines. Ensure even tightening on both legs. |
| Using the wrong size U-bolt for the pipe diameter, leading to a loose or overly constrictive fit. | Always verify the 'pipe size' designation against the actual outside diameter of the pipe and compare it with the U-bolt's inside width (A). |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe and conduit support in corrosive environments, Marine hardware and structural fastening, Plumbing and HVAC system anchoring.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||