Engineered for superior corrosion resistance, this 304 stainless steel U-bolt is designed for secure and reliable fastening of 2" nominal pipe. Its robust construction ensures long-term performance in demanding environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.16" |
| Inside Length ( B) | 5.79" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this U-bolt is manufactured from high-grade 304 stainless steel, renowned for its excellent resistance to a broad spectrum of corrosive agents and atmospheric conditions. The precise dimensions, including an inside width (A) of 1.16 inches and an inside length (B) of 5.79 inches, are critical for accommodating standard 2-inch nominal pipe diameters and ensuring proper fit. The 1/2"-13 UNC thread size provides robust anchoring capabilities, suitable for a wide array of clamping and support applications where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it is centered for even pressure distribution. 2. Place the provided washers and nuts onto the threaded legs of the U-bolt. 3. Tighten the nuts incrementally and evenly, alternating between each side, to secure the pipe firmly to the mounting surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong U-bolt size for the pipe diameter. | Always verify the nominal pipe size and consult spec sheets to ensure the U-bolt's inside dimensions are appropriate. |
| Over-tightening or under-tightening the nuts. | Tighten nuts evenly and to the manufacturer's recommended torque specifications to avoid deforming the pipe or compromising the hold. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Plumbing and piping support systems, Marine and offshore installations, Chemical processing equipment mounting, Industrial machinery and conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||