This robust 304 stainless steel U-bolt is engineered for secure, long-lasting support of 2" nominal pipes. Its superior corrosion resistance ensures reliable performance in harsh industrial applications, preventing premature failure.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 2.72" |
| Inside Length ( B) | 6.20" |
| Thread Size | 1/2"-13 |
Designed for demanding industrial environments, this U-bolt is fabricated from premium 304 stainless steel, offering exceptional resistance to corrosion, oxidation, and a wide range of chemicals. The specific dimensions are an inside width (A) of 2.72 inches and an inside length (B) of 6.20 inches, accommodating 2" nominal pipe sizes. The threads are a standard 1/2"-13 UNC, ensuring compatibility with common mounting hardware. This material choice guarantees structural integrity and extended service life in marine, chemical processing, and outdoor exposed applications where rust and degradation are primary concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it rests securely on the supporting structure or beam. 2. Insert the threaded legs of the U-bolt through the pre-drilled holes in the mounting plate or saddle. 3. Secure the U-bolt by threading on the 1/2"-13 nuts and washers, tightening them evenly until the pipe is firmly held, avoiding overtightening which can deform the pipe.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong U-bolt size for the pipe diameter. | Always confirm the nominal pipe size and select a U-bolt with the appropriate inside width (A) to ensure a snug fit without excessive clamping force. |
| Not utilizing washers when tightening nuts. | Always use flat washers under the nuts to distribute the clamping force evenly across the mounting surface, preventing damage and ensuring a secure connection. |
| Selecting a lower-grade steel in corrosive environments. | For any application exposed to moisture, chemicals, or saltwater, opt for 304 or 316 stainless steel to prevent rust and premature failure. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe hanging and support in chemical plants, Marine and offshore structural applications, Plumbing and conduit support in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||