This robust 304 stainless steel U-bolt is engineered for secure and corrosion-resistant mounting of 2" diameter pipes and conduits. Its superior material properties ensure longevity in demanding industrial and marine settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 3.19" |
| Inside Length ( B) | 7.05" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is constructed from high-grade 304 stainless steel, offering exceptional resistance to corrosion and oxidation, making it ideal for harsh environments. The bolt features an inside width (A) of 3.19 inches and an inside length (B) of 7.05 inches, precisely designed to accommodate standard 2-inch nominal pipe sizes. The threaded ends are 1/2"-13 UNC, ensuring compatibility with standard nuts and washers for secure fastening. This specification guarantees reliable support for piping systems in chemical processing, food and beverage, marine, and outdoor applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it is centered. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten with appropriate 1/2"-13 nuts and washers, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts until snug, then apply an additional quarter turn. Use a torque wrench if specified for the application. |
| Using a U-bolt with inadequate corrosion resistance for the environment. | Always select 304 stainless steel or higher for marine, chemical, or outdoor applications to prevent premature failure due to rust. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe and conduit support in corrosive environments, Marine and offshore installations, Chemical processing facilities, Wastewater treatment plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||