This robust 304 stainless steel U-bolt is engineered for secure and corrosion-resistant fastening of 2-inch diameter pipes. Its precise dimensions ensure a reliable and long-lasting hold in challenging industrial and marine applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.32" |
| Inside Length ( B) | 2.24" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt is fabricated from premium 304 stainless steel, offering superior corrosion and oxidation resistance compared to standard carbon steel. The material's inherent strength and ductility make it ideal for applications exposed to moisture, chemicals, and varying temperatures. With an inside width (A) of 3.32 inches and an inside length (B) of 2.24 inches, it is specifically designed to accommodate standard 2-inch nominal pipe sizes. The 1/2"-13 UNC thread size on both legs ensures compatibility with standard nuts and washers, facilitating secure clamping. Its robust construction guarantees structural integrity and consistent performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate nuts and washers compatible with the 1/2"-13 thread size. 2. Position the U-bolt around the 2-inch pipe, ensuring the curved section contacts the pipe surface. 3. Thread the nuts onto the U-bolt legs, tightening them evenly to secure the pipe against a mounting surface or structural member.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the pipe's nominal diameter and select a U-bolt with appropriate internal dimensions (width and length) to ensure a snug fit and secure clamping. |
| Overtightening nuts, leading to deformation of the pipe or U-bolt. | Tighten nuts evenly and progressively. Apply sufficient torque to secure the pipe without causing damage. Refer to application-specific torque guidelines if available. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe support and mounting in plumbing systems, Marine and offshore applications requiring corrosion resistance, Securing conduit and cable trays.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||