This robust 304 stainless steel U-bolt is engineered for secure pipe support and clamping. Designed to fit 1" nominal pipe size, it provides exceptional corrosion resistance for demanding applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.34" |
| Inside Length ( B) | 4.16" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this U-bolt features an inside width (A) of 1.34 inches and an inside length (B) of 4.16 inches, precisely accommodating 1-inch nominal pipe. Constructed from premium 304 stainless steel, it offers superior tensile strength and excellent resistance to pitting and crevice corrosion in marine, chemical processing, and outdoor environments. The 1/2"-13 UNC thread size ensures a secure and reliable connection with compatible nuts and washers, facilitating robust structural integrity for pipe mounting and bracing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it sits flush against the mounting surface. 2. Secure each leg of the U-bolt with a washer and nut, threading them on by hand. 3. Using appropriate wrenches, tighten the nuts evenly on both sides until the pipe is firmly secured, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Always verify the nominal pipe size and select a U-bolt with the correct inside width (A) to ensure a snug fit without damaging the pipe. |
| Insufficient tightening of nuts, leading to pipe movement. | Tighten nuts evenly and firmly on both sides to prevent vibration and ensure the pipe remains stationary and supported. |
| Not using washers, which can lead to premature wear on the pipe or mounting surface. | Always install appropriate washers under the nuts to distribute the load and protect the pipe and mounting surface. |
A: This 304 Stainless Steel U-Bolt, 1" Pipe is manufactured from 304 Stainless Steel.
A: Marine pipe support, Chemical processing equipment mounting, Outdoor conduit and pipe bracing, Plumbing and HVAC system support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||