Engineered from premium 304 stainless steel, this robust U-bolt is designed for secure and reliable fastening of 2" nominal pipe. Its superior corrosion resistance ensures longevity in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.19" |
| Inside Length ( B) | 7.22" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt boasts an inside width (A) of 1.19 inches and an inside length (B) of 7.22 inches, precisely accommodating 2" nominal pipe with an outer diameter of 2.375 inches. Constructed from high-grade 304 stainless steel, it offers exceptional resistance to rust, corrosion, and pitting, making it ideal for marine, chemical, food processing, and outdoor applications. The 1/2"-13 UNC threads are accurately formed for consistent engagement with mating nuts, ensuring a secure and stable installation. Its mechanical properties provide excellent tensile strength and durability under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it sits snugly against the pipe's curvature. 2. Place the provided support plate (if applicable) or backing material against the pipe opposite the U-bolt. 3. Thread the two nuts onto the U-bolt's threaded ends, tightening them evenly and progressively to secure the pipe. Ensure consistent pressure from both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect U-bolt size selection for the pipe's outer diameter. | Always verify the pipe's actual outer diameter and compare it with the U-bolt's inside dimensions (width and length) to ensure a proper fit. For 2" nominal pipe, the OD is typically 2.375". |
| Uneven tightening of the nuts, leading to stress concentration and potential pipe deformation. | Tighten the nuts in an alternating, criss-cross pattern. Gradually increase torque on each nut to apply even pressure and avoid over-tightening one side before the other. |
A: This 304 Stainless Steel U-Bolt, 2" Pipe is manufactured from 304 Stainless Steel.
A: Pipe support and anchoring in plumbing systems, Marine hardware and vessel outfitting, Chemical processing and handling equipment, Food and beverage industry installations, Outdoor structural support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||