This robust 304 stainless steel stock sheet is engineered for high-performance pneumatic applications. Its exceptional durability and corrosion resistance ensure reliability in the most challenging industrial conditions, providing a stable foundation for critical components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.739" |
| Length | 47" |
| Width | 45" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers superior mechanical strength and exceptional resistance to corrosion, oxidation, and a wide range of chemicals, making it ideal for pneumatic system fabrication. With precise dimensions of 0.739 inches thickness, 47 inches length, and 45 inches width, it provides ample material for custom manifold construction, enclosure fabrication, and structural support within pneumatic assemblies, ensuring long-term operational integrity under pressure and environmental stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity before cutting. 2. Utilize appropriate cutting and fabrication tools suitable for 0.739" thick 304 stainless steel. 3. Ensure all edges are deburred and cleaned to prevent contamination within pneumatic circuits.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive pneumatic environments. | Always select 304 stainless steel or higher grades for applications exposed to moisture, chemicals, or saltwater spray to prevent premature corrosion and system failure. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and clean all cut edges to eliminate sharp fragments that could dislodge and contaminate pneumatic components, leading to malfunctions. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pneumatic Manifold Fabrication, Enclosure for Pneumatic Control Panels, Structural Supports for Heavy-Duty Pneumatic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||