This robust 304 stainless steel stock sheet is engineered for demanding pneumatic systems. Its superior corrosion resistance and durability make it an ideal material for fabricating custom components and enclosures in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.956" |
| Length | 14" |
| Width | 42" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a precise thickness of 0.956 inches, a length of 14 inches, and a width of 42 inches. Composed of an austenitic chromium-nickel alloy, it offers excellent resistance to corrosion, oxidation, and intergranular attack, even in aggressive atmospheric conditions. This material's inherent strength and formability allow for the fabrication of custom pneumatic manifolds, housings, and structural components requiring high integrity and longevity in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against order specifications. 2. Prepare cutting and forming equipment for precise fabrication according to design requirements. 3. Install fabricated components, ensuring proper sealing and alignment within the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive environments. | Always specify 304 or higher grade stainless steel for components exposed to moisture, chemicals, or high humidity to prevent premature corrosion and failure. |
| Insufficient material thickness for load-bearing pneumatic components. | Consult engineering drawings and load calculations to ensure the selected sheet thickness is adequate to withstand operational pressures and mechanical stresses. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Pneumatic Manifold Fabrication, Enclosures for Pneumatic Control Panels, Structural Components in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||