This 304 stainless steel stock sheet, precisely dimensioned at 0.505" x 22" x 45", offers exceptional corrosion resistance and structural integrity for advanced pneumatic applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.505" |
| Length | 22" |
| Width | 45" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet meets stringent material requirements for high-performance pneumatic systems. Measuring 0.505 inches in thickness, 22 inches in length, and 45 inches in width, it provides substantial material for custom fabrication of valve bodies, enclosures, and structural components. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and its robust mechanical strength, ensure longevity and reliability in demanding industrial environments. This makes it an ideal choice for applications involving aggressive fluids, high pressures, or where sanitary conditions are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and finish against project specifications. 2. Employ appropriate cutting and machining techniques suitable for 0.505" thick 304 stainless steel. 3. Ensure all fabricated components are deburred and cleaned to prevent particulate contamination within pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Always select 304 stainless steel for applications involving moisture, chemicals, or aggressive media to prevent premature corrosion and system failure. |
| Inadequate cleaning of fabricated components. | Thoroughly clean all cut edges and machined surfaces to remove any metal shavings or debris that could compromise pneumatic system performance or cause damage. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic valve bodies, Enclosures for pneumatic control panels, Structural components in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||