This 304 stainless steel stock sheet offers superior corrosion resistance and strength for critical suspending and bracing applications. Its robust 0.191" thickness ensures reliability in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.191" |
| Length | 28" |
| Width | 35" |
Specified by design engineers worldwide, this 0.191-inch thick 304 stainless steel stock sheet, measuring 28 inches by 35 inches, provides exceptional tensile strength and formability. Manufactured to stringent standards, its 304 grade ensures excellent resistance to atmospheric, chemical, and food-grade corrosion, making it suitable for environments prone to moisture and corrosive agents. This material's inherent durability and non-magnetic properties make it a preferred choice for structural components in marine, food processing, architectural, and industrial applications where long-term performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the sheet using a suitable marking tool. 2. Utilize an industrial-grade cutting tool, such as a metal shear or plasma cutter, to precisely cut the sheet to the desired dimensions, ensuring clean edges. 3. Secure the cut sheet using appropriate fasteners or welding techniques, following design specifications for load-bearing and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for load-bearing applications. | Consult engineering drawings and load calculations to select fasteners with adequate shear and tensile strength for the intended application. |
| Inadequate edge preparation prior to welding. | Ensure edges are clean, free from contaminants, and properly beveled according to welding procedure specifications for optimal weld penetration and strength. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing in corrosive environments, Customized suspension components for industrial equipment, Fabrication of marine hardware and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||