This 304 stainless steel stock sheet provides exceptional durability and corrosion resistance for critical pneumatic system components. Engineered for demanding industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.488" |
| Length | 26" |
| Width | 16" |
A high-performance industrial component, this 0.488-inch thick, 26-inch long, and 16-inch wide stock sheet is fabricated from 304 stainless steel, a material renowned for its superior tensile strength, excellent corrosion resistance against a wide range of chemicals, and inherent antimicrobial properties. This makes it ideally suited for applications within pneumatic systems that require robust structural integrity, resistance to environmental factors, and hygienic operation. Its precise dimensions ensure seamless integration into custom manifold designs, valve bodies, and enclosure fabrication within the pneumatics sector.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions against design specifications. 2. Prepare mounting surfaces for optimal support and alignment. 3. Securely fasten the sheet using appropriate industrial-grade fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always select 304 stainless steel for applications exposed to moisture, chemicals, or high humidity to prevent premature corrosion and failure. |
| Improper sheet alignment during mounting. | Ensure precise alignment before final fastening to prevent undue stress on the material and ensure proper system functionality. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic manifold fabrication, Valve body construction, Pneumatic enclosure panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||