This robust 304 stainless steel stock sheet is engineered for demanding abrading and polishing applications. Its superior material composition ensures longevity and exceptional performance in abrasive environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.669" |
| Length | 23" |
| Width | 21" |
A high-performance industrial component, this 304 stainless steel stock sheet measures 0.669 inches in thickness, with overall dimensions of 23 inches in length and 21 inches in width. Fabricated from AISI 304 stainless steel, it offers excellent corrosion resistance, formability, and weldability, making it suitable for a wide array of fabrication and finishing processes. The material's inherent strength and resistance to wear ensure durability in high-traffic and abrasive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and free of debris. 2. Position the 304 stainless steel stock sheet according to project requirements. 3. Secure the sheet using appropriate clamping or fastening methods for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect abrasive media for the specific polishing task. | Consult abrasive manufacturer recommendations and perform test patches on scrap material to determine optimal grit and type of abrasive. |
| Applying excessive pressure during polishing, leading to premature wear or uneven finish. | Utilize consistent, moderate pressure and employ a systematic movement pattern to achieve a uniform and desired surface finish. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Surface preparation for coatings and finishes, Manufacturing of custom abrasive tools, Component fabrication in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||