This 304 stainless steel stock sheet is engineered for rigorous material handling and fabrication tasks. Its robust construction and inherent corrosion resistance make it a dependable choice for demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.727" |
| Length | 16" |
| Width | 26" |
A high-performance industrial component, this 0.727-inch thick, 16-inch by 26-inch stock sheet is fabricated from premium 304 stainless steel. Renowned for its excellent corrosion resistance, weldability, and durability, it exhibits a tensile strength of approximately 515 MPa and a yield strength of 205 MPa. This material composition makes it exceptionally resistant to oxidation and most corrosive agents, ensuring longevity and performance in diverse operational settings. Its precise dimensions facilitate straightforward integration into custom material handling systems, fabrication projects, and structural components where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify the stock sheet dimensions against design specifications. 2. Prepare the mounting or joining surfaces for optimal adhesion or weld integrity. 3. Securely fasten or weld the sheet according to project requirements, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for stainless steel, leading to material damage or dulling. | Utilize carbide-tipped or high-speed steel blades specifically designed for cutting stainless steel to maintain edge integrity and achieve clean cuts. |
| Inadequate surface preparation before welding, resulting in compromised weld strength and corrosion resistance. | Thoroughly degrease and remove any surface contaminants (e.g., oils, dirt, scale) from the stainless steel surfaces prior to welding to ensure a sound and corrosion-resistant joint. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom material handling chutes and hoppers, Protective paneling for industrial equipment, Fabrication of specialized frames and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||