This 304 stainless steel stock sheet provides exceptional corrosion resistance and formability. Precisely manufactured to meet stringent industrial demands for a wide range of fabrication projects.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.831" |
| Length | 29" |
| Width | 41" |
Built to exacting engineering tolerances, this 0.831-inch thick stock sheet offers a nominal length of 29 inches and a width of 41 inches. Composed of 304 austenitic stainless steel, it boasts a minimum tensile strength of 515 MPa and a yield strength of 205 MPa, ensuring robust performance in structural and fabrication applications. Its inherent chromium and nickel content provides excellent resistance to oxidation and a broad spectrum of corrosive environments, making it ideal for chemical processing, food and beverage equipment, and architectural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the fabrication area, ensuring it is clean and free of contaminants. 2. Utilize appropriate cutting and forming tools calibrated for the specified material thickness. 3. Weld or fasten using methods suitable for 304 stainless steel, adhering to industry best practices for joint integrity and corrosion prevention.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding rods or techniques, leading to potential galvanic corrosion. | Employ TIG or MIG welding with filler materials specifically designed for 304 stainless steel, such as ER308L, and ensure proper shielding gas coverage. |
| Inadequate post-fabrication cleaning, leaving behind residues that can initiate corrosion. | Thoroughly clean all surfaces after fabrication using non-abrasive methods and appropriate stainless steel cleaners to remove weld spatter, oils, and contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication and machine parts, Chemical processing equipment components, Food and beverage industry processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||