This robust 304 stainless steel stock sheet is engineered for superior performance in demanding lubrication environments. Its substantial gauge and material properties ensure exceptional durability and resistance to corrosive elements.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.788" |
| Length | 41" |
| Width | 48" |
Purpose-built for heavy-duty applications, this 0.788-inch thick, 41-inch long by 48-inch wide stock sheet is manufactured from grade 304 stainless steel, renowned for its excellent corrosion resistance, formability, and weldability. The high chromium and nickel content provides inherent passivation, making it ideal for environments exposed to moisture, chemicals, and moderate temperatures. Its substantial thickness ensures structural integrity and longevity, suitable for fabricating robust components within industrial lubrication systems, grease traps, or as protective sheeting in high-wear areas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stock sheet according to the design specifications, ensuring proper alignment. 3. Secure the stock sheet using appropriate fasteners or welding techniques, as dictated by the application's load requirements and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Always ensure the mounting surface is clean, dry, and free of any grease, oil, or residual material to ensure a secure and lasting bond or weld. |
| Using incorrect fasteners or welding procedures for the intended load and environment. | Consult engineering drawings or consult a qualified engineer to determine the appropriate grade of fasteners or welding consumables that are compatible with 304 stainless steel and meet the application's stress and corrosion resistance requirements. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Fabrication of custom lubrication system components, Construction of industrial grease traps and containment units, Protective sheeting for high-wear or corrosive zones.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||