This 304 stainless steel stock sheet, measuring 0.901 inches thick, 18 inches wide, and 44 inches long, provides exceptional strength and corrosion resistance for critical suspending and bracing applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.901" |
| Length | 18" |
| Width | 44" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers superior tensile strength and formability for demanding structural applications. Its 0.901" thickness ensures robust load-bearing capacity, while the 18" x 44" dimensions provide ample material for fabrication. The inherent corrosion resistance of 304 stainless steel makes it ideal for environments exposed to moisture, chemicals, or extreme temperatures, ensuring longevity and structural integrity in suspending and bracing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the sheet according to project specifications. 2. Utilize appropriate cutting tools (e.g., abrasive saw, plasma cutter) for precise material removal, adhering to safety protocols. 3. Fabricate and install the cut sections using recommended fasteners and welding techniques suitable for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or inadequate welding procedures for the load requirements. | Consult structural load calculations and engineering drawings to select fasteners and welding techniques that meet or exceed the design specifications for the specific application. |
| Improper handling and storage leading to scratches or contamination of the stainless steel surface. | Store sheets flat, elevated from the ground, and protect surfaces with non-abrasive coverings. Handle with clean gloves to prevent fingerprints and oils, especially in critical applications. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing in corrosive environments, Custom suspension hardware fabrication, Industrial support systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||