This 304 stainless steel stock sheet offers superior corrosion resistance and durability for critical suspending and bracing applications. Its precise dimensions ensure reliable integration into demanding industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.021" |
| Length | 18" |
| Width | 41" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to exacting standards, featuring a nominal thickness of 0.021 inches, a length of 18 inches, and a width of 41 inches. Composed of a chromium-nickel alloy, it exhibits excellent resistance to oxidation and corrosion, making it ideal for environments exposed to moisture, chemicals, or high temperatures. Its robust mechanical properties provide reliable structural integrity for various suspending and bracing applications, ensuring long-term performance and safety. This material is also readily formable and weldable, facilitating custom fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the sheet to the required dimensions using appropriate cutting tools. 2. Prepare the mounting surfaces, ensuring they are clean and free from debris. 3. Securely fasten the sheet using approved fasteners and bracing techniques, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the sheet's dimensions and anticipated loads. | Always select fasteners with a tensile strength and diameter appropriate for the calculated load requirements and the sheet's gauge. |
| Inadequate edge preparation or finishing, leading to stress concentrations. | Ensure all cut edges are deburred and smooth to prevent premature failure and maintain structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom bracing for industrial equipment, Support structures for HVAC components, Enclosure panels in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||